Centering Clamping Mandrels
EH 23340.
For clamping and centering of workpieces with internal bore.
Your selection resulted in 7 hits
- d1: 12.4 mm
- d2 min.: 8 mm
- d3 -0.05: 29.72 mm
- d4: M3
- d5: 21 mm
- d6: M4
- h1: 21.8 mm
- h2: 16 mm
- h3: 15 mm
- l1: ~ 6 mm
- l2: 8 mm
- Number of segments: 4
- WS WS1: 3 mm
- WS WS2: 2 mm
- Clamping force max.: 3 kN
- Tightening torque max.: 3.5 Nm
- Location hole H7: 29.72 mm
- Weight: 58 g
- d1: 14.2 mm
- d2 min.: 12.2 mm
- d3 -0.05: 31.5 mm
- d4: M3
- d5: 23.1 mm
- d6: M6
- h1: 24.9 mm
- h2: 19 mm
- h3: 15 mm
- l1: ~ 6 mm
- l2: 12 mm
- Number of segments: 4
- WS WS1: 5 mm
- WS WS2: 2 mm
- Clamping force max.: 6 kN
- Tightening torque max.: 12 Nm
- Location hole H7: 31.5 mm
- Weight: 62 g
- d1: 20 mm
- d2 min.: 13.5 mm
- d3 -0.05: 37.5 mm
- d4: M3
- d5: 29 mm
- d6: M8
- h1: 24.9 mm
- h2: 19 mm
- h3: 15 mm
- l1: ~ 6 mm
- l2: 14 mm
- Number of segments: 6
- WS WS1: 6 mm
- WS WS2: 2 mm
- Clamping force max.: 8 kN
- Tightening torque max.: 24 Nm
- Location hole H7: 37.5 mm
- Weight: 99 g
- d1: 27 mm
- d2 min.: 18 mm
- d3 -0.05: 50 mm
- d4: M4
- d5: 39.4 mm
- d6: M10
- h1: 28.6 mm
- h2: 22.2 mm
- h3: 17.5 mm
- l1: ~ 7 mm
- l2: 17 mm
- Number of segments: 6
- WS WS1: 8 mm
- WS WS2: 2.5 mm
- Clamping force max.: 13 kN
- Tightening torque max.: 42 Nm
- Location hole H7: 50 mm
- Weight: 191 g
- d1: 35.3 mm
- d2 min.: 25.4 mm
- d3 -0.05: 56 mm
- d4: M4
- d5: 45.5 mm
- d6: M12
- h1: 31.8 mm
- h2: 25.4 mm
- h3: 20.6 mm
- l1: ~ 7 mm
- l2: 21 mm
- Number of segments: 6
- WS WS1: 10 mm
- WS WS2: 2.5 mm
- Clamping force max.: 15 kN
- Tightening torque max.: 105 Nm
- Location hole H7: 56 mm
- Weight: 306 g
- d1: 51 mm
- d2 min.: 30 mm
- d3 -0.05: 75.5 mm
- d4: M5
- d5: 63.9 mm
- d6: M16
- h1: 39.6 mm
- h2: 31.8 mm
- h3: 27 mm
- l1: ~ 11 mm
- l2: 22 mm
- Number of segments: 6
- WS WS1: 14 mm
- WS WS2: 3 mm
- Clamping force max.: 26 kN
- Tightening torque max.: 200 Nm
- Location hole H7: 75.5 mm
- Weight: 762 g
- d1: 77 mm
- d2 min.: 30 mm
- d3 -0.05: 107.5 mm
- d4: M6
- d5: 92.5 mm
- d6: M16
- h1: 45.5 mm
- h2: 37.6 mm
- h3: 32.3 mm
- l1: ~ 12 mm
- l2: 20 mm
- Number of segments: 8
- WS WS1: 14 mm
- WS WS2: 4 mm
- Clamping force max.: 26 kN
- Tightening torque max.: 200 Nm
- Location hole H7: 107.5 mm
- Weight: 1832 g
Material
Body
- Steel, blackened
Clamping screw
- Case-hardened steel, case-hardened
Notes
Special types on request.
Assembly
The centering clamping mandrel can be machined to the required seating diameter (e.g. by turning/milling). It must be noticed that before machining the centering clamping mandrel, it will be expanded approx. 0.1 mm over the clamping diameter. To machine the mandrel, a nut will be provided.
Further products
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 10.06.2022
Does not contain Proposition 65 substances
No Proposition 65 substances included
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.