Clamping Claws
EH 23370.
Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.
Your selection resulted in 3 hits
- d1 f7: 28 mm
- h1: 31 mm
- b1: 40 mm
- b2: 17 mm
- d2: M12
- d3: M12
- h2: 54 mm
- h3: 13 mm
- l1: 77 mm
- l2: 55 mm
- l3: 43 mm
- l4: 85 mm
- r ±0.02: 22 mm
- Stroke s: 11 mm
- WS: 18 mm
- Location hole H7: 28 mm
- Weight: 543 g
- d1 f7: 28 mm
- h1: 53 mm
- b1: 40 mm
- b2: 17 mm
- d2: M12
- d3: M12
- h2: 76 mm
- h3: 13 mm
- l1: 77 mm
- l2: 55 mm
- l3: 43 mm
- l4: 120 mm
- r ±0.02: 22 mm
- Stroke s: 25 mm
- WS: 18 mm
- Location hole H7: 28 mm
- Weight: 638 g
- d1 f7: 28 mm
- h1: 83 mm
- b1: 40 mm
- b2: 17 mm
- d2: M12
- d3: M12
- h2: 106 mm
- h3: 13 mm
- l1: 77 mm
- l2: 55 mm
- l3: 43 mm
- l4: 170 mm
- r ±0.02: 22 mm
- Stroke s: 41 mm
- WS: 18 mm
- Location hole H7: 28 mm
- Weight: 798 g
Material
Body
- Case-hardened steel, case-hardened, blackened and ground
Disc
- Heat-treated steel, tempered, punched, mechanically trued, phosphatized
Spring
- stainless steel
Clamping screw
- Heat-treated steel
Notes
The tightening torque depends on the specific mounting situation.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 17.01.2022
Does not contain Proposition 65 substances
No Proposition 65 substances included
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.