Locating Bushings with Seal, plain for lifting pins
EH 22350.
The seal prevents the penetration of liquid and dirt. The bushing is therefore especially suitable for use in the open air.
Locating bushings are used for quick and safe locating of lifting pins EH 22350 / EH 22351.
This design is suitable for applications which require installation flush to the surface.
A face wrench is required for installation. As an accessory, we offer a standard adjustable face wrench, offset, and a face and socket wrench. In combination with a socket-wrench/screwdriver, the face and socket wrench is especially suitable for use if space is restricted.
Corrosion and abrasion resistant.
Your selection resulted in 4 hits
More details
- d1 H11: 8 mm
- d2: M16 x 1,5 mm
- For nominal length: 10 mm
- d3 -0.2: 24 mm
- d4 +0.3: 9.9 mm
- d5 +0.1: 3.1 mm
- l1: 37.5 mm
- l2: 32.5 mm
- l3: 16 mm
- l4: 12.5 mm
- Tightening torque max.: 75 Nm
- x1): 1.5 mm
- Load capacity1) F1: 1.5 kN
- Load capacity1) F2: 1.2 kN
- Load capacity1) F3: 0.5 kN
- Weight: 47 g
- d1 H11: 10 mm
- d2: M20 x 1,5 mm
- For nominal length: 15 mm
- d3 -0.2: 28 mm
- d4 +0.3: 12.3 mm
- d5 +0.1: 5.1 mm
- l1: 51 mm
- l2: 45 mm
- l3: 20 mm
- l4: 21 mm
- Tightening torque max.: 100 Nm
- x1): 1.5 mm
- Load capacity1) F1: 2.7 kN
- Load capacity1) F2: 2.4 kN
- Load capacity1) F3: 2.1 kN
- Weight: 92 g
- d1 H11: 12 mm
- d2: M24 x 1,5 mm
- For nominal length: 15 mm
- d3 -0.2: 32 mm
- d4 +0.3: 14.4 mm
- d5 +0.1: 5.1 mm
- l1: 53 mm
- l2: 47 mm
- l3: 22 mm
- l4: 21 mm
- Tightening torque max.: 150 Nm
- x1): 1.5 mm
- Load capacity1) F1: 3.5 kN
- Load capacity1) F2: 3.2 kN
- Load capacity1) F3: 2.8 kN
- Weight: 125 g
- d1 H11: 16 mm
- d2: M30 x 2 mm
- For nominal length: 25 mm
- d3 -0.2: 39 mm
- d4 +0.3: 19.3 mm
- d5 +0.1: 5.1 mm
- l1: 78 mm
- l2: 72 mm
- l3: 30 mm
- l4: 33 mm
- Tightening torque max.: 200 Nm
- x1): 1.5 mm
- Load capacity1) F1: 4.8 kN
- Load capacity1) F2: 4.5 kN
- Load capacity1) F3: 4.1 kN
- Weight: 253 g
Material
Bushing
- Stainless steel 1.4542, precipitation-hardened
O-ring
- NBR
Spring
- stainless steel
adjustable face wrench, offset
: adjustable face wrench, offset
Suitable for size d1: 8 mm
- adjustable face wrench, offset
- Suitable for size d1: 8 mm
- Pin diameter -0.1: 3 mm
- Weight: 121 g
adjustable face wrench, offset
: adjustable face wrench, offset
Suitable for size d1: 10 mm/12 mm/16 mm/20 mm/25 mm
- adjustable face wrench, offset
- Suitable for size d1: 10 mm/12 mm/16 mm/20 mm/25 mm
- Pin diameter -0.1: 5 mm
- Weight: 309 g
face wrench (socket wrench insert)
Suitable for size d1: 8 mm
- Pin spacing ±0.1: 16 mm
- Suitable for size d1: 8 mm
- Pin diameter -0.1: 3 mm
- Square drive: 1/2 inch
- Weight: 116 g
face wrench (socket wrench insert)
Suitable for size d1: 10 mm
- Pin spacing ±0.1: 20 mm
- Suitable for size d1: 10 mm
- Pin diameter -0.1: 5 mm
- Square drive: 1/2 inch
- Weight: 136 g
face wrench (socket wrench insert)
Suitable for size d1: 12 mm
- Pin spacing ±0.1: 22 mm
- Suitable for size d1: 12 mm
- Pin diameter -0.1: 5 mm
- Square drive: 1/2 inch
- Weight: 185 g
By clicking on the video, I agree to the associated data processing as set out in the Privacy policy.
Assembly
Safe tolerances and consistent function.
Easily incorporated into different materials
Bush can be easily installed via optional assembly tool.
Can be mounted in blind holes.
For thin-walled parts, lock nuts are used for assembly.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 10.06.2022
Does not contain Proposition 65 substances
No Proposition 65 substances included
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.