Hard Metal Inserts
EH 22620.
Basic element to be mounted into clamping devices, clamping jaws, clamping arms, claw feed systems and so forth.
For an abrasion-proof transmission of high holding forces, e. g. on cast or forged pieces.
Your selection resulted in 8 hits
More details
- ribbed – picture 1
- d1 ±0.1: 8.3 mm
- d2 ±0.2: 9.1 mm
- d3: ~ 7.7 mm
- h1: 5 mm
- t: 2 mm
- Weight: 3.3 g
- ribbed – picture 1
- d1 ±0.1: 11.3 mm
- d2 ±0.2: 12.1 mm
- d3: ~ 10.6 mm
- h1: 5 mm
- t: 2 mm
- Weight: 5.8 g
- ribbed – picture 1
- d1 ±0.1: 12.6 mm
- d2 ±0.2: 13.4 mm
- d3: ~ 11.9 mm
- h1: 5 mm
- t: 3 mm
- Weight: 6.7 g
- ribbed – picture 1
- d1 ±0.15: 16.6 mm
- d2 ±0.2: 17.4 mm
- d3: ~ 16 mm
- h1: 5 mm
- t: 3 mm
- Weight: 12 g
- ribbed – picture 1
- d1 ±0.15: 21.6 mm
- d2 ±0.2: 22.4 mm
- d3: ~ 21 mm
- h1: 5 mm
- t: 3 mm
- Weight: 21 g
- pointed – picture 2
- d1 ±0.1: 8.3 mm
- d2 ±0.2: 9.1 mm
- d3: ~ 6.3 mm
- h1: 5.8 mm
- h2: 5 mm
- Weight: 3.6 g
- pointed – picture 2
- d1 ±0.1: 11.3 mm
- d2 ±0.2: 12.1 mm
- d3: ~ 9.3 mm
- h1: 5.8 mm
- h2: 5 mm
- Weight: 6.7 g
- pointed – picture 2
- d1 ±0.1: 12.6 mm
- d2 ±0.2: 13.4 mm
- d3: ~ 10 mm
- h1: 5.8 mm
- h2: 5 mm
- Weight: 8.2 g
Material
Insert
- Hard metal, ribbed
- Hard metal, pointed
Assembly
Mounting can take place by either soldering, glueing or pressing in. The three positioning tabs guarantee exact centering and when being glued or pressed in, article is secured against rotating. Depending on the individual element choose a mounting diameter between d1 and d2.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 23.01.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.