Self-Aligning Pads adjustable
EH 22740.
Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements.
Your selection resulted in 21 hits
Version
picture
Material
s [mm]
d1 [mm]
l [mm]
l1 [mm]
Load capacity for static load max. [kN]
Article-No.
CAD / Documents
Price
[€]
Available
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
13 mm
d1 [mm]:
M8
l [mm]:
36.6 mm
l1 [mm]:
25 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22740.0013
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- s: 13 mm
- d1: M8
- l: 36.6 mm
- l1: 25 mm
- d2: 5.8 mm
- e: 14.5 mm
- ball diameter: 8.5 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 25 Nm
- Weight: 20 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
17 mm
d1 [mm]:
M10
l [mm]:
45.7 mm
l1 [mm]:
30 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22740.0016
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- s: 17 mm
- d1: M10
- l: 45.7 mm
- l1: 30 mm
- d2: 8.6 mm
- e: 19 mm
- ball diameter: 12 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 46 Nm
- Weight: 44 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
17 mm
d1 [mm]:
M12
l [mm]:
50.7 mm
l1 [mm]:
35 mm
Load capacity for static load max. [kN]:
15 kN
Article-No.:
22740.0017
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- s: 17 mm
- d1: M12
- l: 50.7 mm
- l1: 35 mm
- d2: 8.6 mm
- e: 19 mm
- ball diameter: 12 mm
- Load capacity for static load max.: 15 kN
- Tightening torque max.: 82 Nm
- Weight: 57 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
24 mm
d1 [mm]:
M16
l [mm]:
60.7 mm
l1 [mm]:
40 mm
Load capacity for static load max. [kN]:
25 kN
Article-No.:
22740.0024
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- s: 24 mm
- d1: M16
- l: 60.7 mm
- l1: 40 mm
- d2: 10.5 mm
- e: 27 mm
- ball diameter: 16 mm
- Load capacity for static load max.: 25 kN
- Tightening torque max.: 206 Nm
- Weight: 131 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
30 mm
d1 [mm]:
M20
l [mm]:
77.3 mm
l1 [mm]:
50 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22740.0030
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- s: 30 mm
- d1: M20
- l: 77.3 mm
- l1: 50 mm
- d2: 20 mm
- e: 33 mm
- ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 407 Nm
- Weight: 278 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
36 mm
d1 [mm]:
M24
l [mm]:
100 mm
l1 [mm]:
70 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22740.0036
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- s: 36 mm
- d1: M24
- l: 100 mm
- l1: 70 mm
- d2: 20 mm
- e: 40 mm
- ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 698 Nm
- Weight: 471 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
46 mm
d1 [mm]:
M30 x 1,5 mm
l [mm]:
100 mm
l1 [mm]:
65 mm
Load capacity for static load max. [kN]:
165 kN
Article-No.:
22740.0046
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- s: 46 mm
- d1: M30 x 1,5 mm
- l: 100 mm
- l1: 65 mm
- d2: 34.6 mm
- e: 51 mm
- ball diameter: 40 mm
- Load capacity for static load max.: 165 kN
- Tightening torque max.: 1355 Nm
- Weight: 918 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Stainless steel 1.4057, heat-treated
s [mm]:
13 mm
d1 [mm]:
M8
l [mm]:
36.6 mm
l1 [mm]:
25 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22740.0113
- with flat-faced ball, bearing surface plain – picture 1, stainless steel
- s: 13 mm
- d1: M8
- l: 36.6 mm
- l1: 25 mm
- d2: 5.8 mm
- e: 14.5 mm
- ball diameter: 8.5 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 25 Nm
- Weight: 20 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Stainless steel 1.4057, heat-treated
s [mm]:
17 mm
d1 [mm]:
M10
l [mm]:
45.7 mm
l1 [mm]:
30 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22740.0116
- with flat-faced ball, bearing surface plain – picture 1, stainless steel
- s: 17 mm
- d1: M10
- l: 45.7 mm
- l1: 30 mm
- d2: 8.6 mm
- e: 19 mm
- ball diameter: 12 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 46 Nm
- Weight: 44 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Stainless steel 1.4057, heat-treated
s [mm]:
17 mm
d1 [mm]:
M12
l [mm]:
50.7 mm
l1 [mm]:
35 mm
Load capacity for static load max. [kN]:
15 kN
Article-No.:
22740.0117
- with flat-faced ball, bearing surface plain – picture 1, stainless steel
- s: 17 mm
- d1: M12
- l: 50.7 mm
- l1: 35 mm
- d2: 8.6 mm
- e: 19 mm
- ball diameter: 12 mm
- Load capacity for static load max.: 15 kN
- Tightening torque max.: 82 Nm
- Weight: 56 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Stainless steel 1.4057, heat-treated
s [mm]:
24 mm
d1 [mm]:
M16
l [mm]:
60.7 mm
l1 [mm]:
40 mm
Load capacity for static load max. [kN]:
25 kN
Article-No.:
22740.0124
- with flat-faced ball, bearing surface plain – picture 1, stainless steel
- s: 24 mm
- d1: M16
- l: 60.7 mm
- l1: 40 mm
- d2: 10.5 mm
- e: 27 mm
- ball diameter: 16 mm
- Load capacity for static load max.: 25 kN
- Tightening torque max.: 206 Nm
- Weight: 129 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Stainless steel 1.4057, heat-treated
s [mm]:
30 mm
d1 [mm]:
M20
l [mm]:
77.3 mm
l1 [mm]:
50 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22740.0130
- with flat-faced ball, bearing surface plain – picture 1, stainless steel
- s: 30 mm
- d1: M20
- l: 77.3 mm
- l1: 50 mm
- d2: 20 mm
- e: 33 mm
- ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 407 Nm
- Weight: 273 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Stainless steel 1.4057, heat-treated
s [mm]:
36 mm
d1 [mm]:
M24
l [mm]:
100 mm
l1 [mm]:
70 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22740.0136
- with flat-faced ball, bearing surface plain – picture 1, stainless steel
- s: 36 mm
- d1: M24
- l: 100 mm
- l1: 70 mm
- d2: 20 mm
- e: 40 mm
- ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 698 Nm
- Weight: 463 g
Version:
with flat-faced ball, bearing surface plain
picture:
1
Material:
Stainless steel 1.4057, heat-treated
s [mm]:
46 mm
d1 [mm]:
M30 x 1,5 mm
l [mm]:
100 mm
l1 [mm]:
65 mm
Load capacity for static load max. [kN]:
165 kN
Article-No.:
22740.0146
- with flat-faced ball, bearing surface plain – picture 1, stainless steel
- s: 46 mm
- d1: M30 x 1,5 mm
- l: 100 mm
- l1: 65 mm
- d2: 34.6 mm
- e: 51 mm
- ball diameter: 40 mm
- Load capacity for static load max.: 165 kN
- Tightening torque max.: 1355 Nm
- Weight: 875 g
Version:
with flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
13 mm
d1 [mm]:
M8
l [mm]:
36.6 mm
l1 [mm]:
25 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22740.0313
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- s: 13 mm
- d1: M8
- l: 36.6 mm
- l1: 25 mm
- d2: 5.8 mm
- e: 14.5 mm
- ball diameter: 8.5 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 25 Nm
- Weight: 20 g
Version:
with flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
17 mm
d1 [mm]:
M10
l [mm]:
45.7 mm
l1 [mm]:
30 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22740.0316
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- s: 17 mm
- d1: M10
- l: 45.7 mm
- l1: 30 mm
- d2: 8.6 mm
- e: 19 mm
- ball diameter: 12 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 46 Nm
- Weight: 44 g
Version:
with flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
17 mm
d1 [mm]:
M12
l [mm]:
50.7 mm
l1 [mm]:
35 mm
Load capacity for static load max. [kN]:
15 kN
Article-No.:
22740.0317
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- s: 17 mm
- d1: M12
- l: 50.7 mm
- l1: 35 mm
- d2: 8.6 mm
- e: 19 mm
- ball diameter: 12 mm
- Load capacity for static load max.: 15 kN
- Tightening torque max.: 82 Nm
- Weight: 56 g
Version:
with flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
24 mm
d1 [mm]:
M16
l [mm]:
60.7 mm
l1 [mm]:
40 mm
Load capacity for static load max. [kN]:
25 kN
Article-No.:
22740.0324
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- s: 24 mm
- d1: M16
- l: 60.7 mm
- l1: 40 mm
- d2: 10.5 mm
- e: 27 mm
- ball diameter: 16 mm
- Load capacity for static load max.: 25 kN
- Tightening torque max.: 206 Nm
- Weight: 130 g
Version:
with flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
30 mm
d1 [mm]:
M20
l [mm]:
77.3 mm
l1 [mm]:
50 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22740.0330
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- s: 30 mm
- d1: M20
- l: 77.3 mm
- l1: 50 mm
- d2: 20 mm
- e: 33 mm
- ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 407 Nm
- Weight: 277 g
Version:
with flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
36 mm
d1 [mm]:
M24
l [mm]:
100 mm
l1 [mm]:
70 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22740.0336
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- s: 36 mm
- d1: M24
- l: 100 mm
- l1: 70 mm
- d2: 20 mm
- e: 40 mm
- ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 698 Nm
- Weight: 471 g
Version:
with flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
s [mm]:
46 mm
d1 [mm]:
M30 x 1,5 mm
l [mm]:
100 mm
l1 [mm]:
65 mm
Load capacity for static load max. [kN]:
165 kN
Article-No.:
22740.0346
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- s: 46 mm
- d1: M30 x 1,5 mm
- l: 100 mm
- l1: 65 mm
- d2: 34.6 mm
- e: 51 mm
- ball diameter: 40 mm
- Load capacity for static load max.: 165 kN
- Tightening torque max.: 1355 Nm
- Weight: 920 g
Material
Ball
- Ball-bearing steel, hardened, bright
- Stainless steel 1.3541, nickel-plated
Body
- Heat-treated steel, tempered, phosphated
- Stainless steel 1.4057, heat-treated
Nut
- Steel, blackened (ISO 4035)
- stainless steel
Notes
Ball protected against rotating.
Loading capacity valid for steel and stainless steel designs.
Special types on request.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 10.06.2022
Does not contain Proposition 65 substances
No Proposition 65 substances included
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.