Down-Thrust Clamps swivelling, size 40
EH 23310.
Universal mechanical clamping element for fast and comfortable changing and clamping of workpieces by means of manually swivelling clamping claw.
The clamps provide the following advantages:
- Rapid manual clamping by means of the clamping screw, the adjustable clamping lever, or the double eccentric tension lever.
- Easier and quicker workpiece change by swinging the clamping claw to the left or right. Continuously variable setting by means of positioning ring 23310.0350
- The use of positioning ring 23310.0350 allows a repeatable precise clamping. Here h1 min. increases by at least 7 mm (stroke minus 7 mm).
- Compact design, therefore less space requirement when clamping.
- Easily adjustable even to large clamping heights, using the height adjusting cylinders.
Your selection resulted in 3 hits
- with clamping screw – picture 2
- System: V70/L12
- d1: 40 mm
- b1: 40 mm
- b2: 17 mm
- d2: M12
- d3: M12
- h1: 50 mm – 70 mm
- h2: 73 mm – 93 mm
- h3: 15 mm
- h4: 13 mm
- l1: 75 mm
- l2: 55 mm
- l3: 43 mm
- Stroke: 20 mm
- Weight: 854 g
- with clamping screw – picture 2
- System: V70/L12
- d1: 40 mm
- b1: 40 mm
- b2: 17 mm
- d2: M12
- d3: M12
- h1: 68 mm – 98 mm
- h2: 91 mm – 121 mm
- h3: 15 mm
- h4: 13 mm
- l1: 75 mm
- l2: 55 mm
- l3: 43 mm
- Stroke: 30 mm
- Weight: 964 g
- with clamping screw – picture 2
- System: V70/L12
- d1: 40 mm
- b1: 40 mm
- b2: 17 mm
- d2: M12
- d3: M12
- h1: 95 mm – 135 mm
- h2: 118 mm – 158 mm
- h3: 22 mm
- h4: 13 mm
- l1: 75 mm
- l2: 55 mm
- l3: 43 mm
- Stroke: 40 mm
- Weight: 1300 g
Material
- Case-hardened steel, case-hardened, blackened and ground
References
The clamping height can be increased by using height adjusting cylinders EH 23310. and disks EH 1107. and EH 1108. It can be reduced by employing clamping inserts, e.g. EH 22730.
Assembly
Down-thrust clamps can be attached in two ways:
- in a T-slot, using a nut for T-slots DIN 508 (EH 23010.)
- with the set screw directly in the mounting plate of, for example, a fixture
The cylinder must make contact over the whole surface.
Exceeding of the clamping height is inhibited by the height limitation.
Further products
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 08.07.2021
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
www.P65Warnings.ca.gov
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.